Audit log, Figure 57: audit log, 57 audit log – HP StorageWorks 2.140 Director Switch User Manual
Page 170: R more details on this log, see, Audit

Using Logs
168
Director Element Manager User Guide
Audit Log
The Audit Log displays a history of all configuration changes applied to the
director from any source such as HAFM, SNMP management stations, or host.
Figure 57: Audit Log
Some actions, such as backing up configuration data and enabling automatic
date/time synchronization, are performed only by the HAFM appliance
without director interaction. These actions are indicated when HAFM
displays in the Source column, as shown in
. If HAFM does not
display, the time stamp is from the director.
■
Date/Time—The date and time of the change on the director.
■
Action—User action that caused the configuration change, such as offline
status, port name change, or change of address.
■
Source—Identifies the user making the change through the Director Element
Manager and IP or DNS host name address of the remote user’s workstation.
—
Maintenance Port
—Change was made by a user connected to the
maintenance port.
—
HAFM application
—Change was made by an Element Manager
user.
—
SNMP
—Change was made by a remote SNMP management station.