beautypg.com

HP StorageWorks 2.140 Director Switch User Manual

Page 127

background image

Configuring the Director

125

Director Element Manager User Guide

For example, in the audit log, you may notice that the Principal setting maps to a
number code of 1, Default maps to a number code of 254, and Never Principal
maps to a number code of 255. The number codes of 2–253 are not currently in
use.

Interop Mode

Choose one of the following modes:

Homogeneous Fabric—Choose this mode if the fabric contains only HP
directors and switches that are operating in Homogeneous Fabric mode.

Open Fabric 1.0—Default. Choose this mode if the fabric contains HP
directors and switches, as well as other open-fabric compliant switches.
Choose this mode for managing heterogeneous fabrics.

This manual is related to the following products: