HP StorageWorks 2.140 Director Switch - Manual (Page 147)

Configuring the Director
145 Director Element Manager User Guide
6. Click OK to save changes and to close the Save Address Configuration As
dialog box.
7. In the Configure Addresses - “Active” dialog box, click Activate to activate
the configuration or click Cancel to close without activating.
Note: If you click Cancel after saving, your configuration will still be added to the
library without being activated.
Managing Stored Address Configurations (FICON Management Style)
This procedure applies only to a director that is using FICON Management Style.
Once address configurations are created through the Configure Addresses -
“Active” dialog box, they are saved to the Address Configuration Library. Use
this procedure to manage address configurations in the Address Configuration
Library.
To manage saved library entries:
1. Click Configure > Addresses on the menu bar and then click Stored. The
Address Configuration Library dialog box displays, as shown in Figure 42 .
Figure 42: Address Configuration Library dialog box
2. Choose a configuration entry by selecting a row. Then use one of the
procedures below.
■ Click Modify to modify a stored configuration. The Configure Addresses
dialog box displays for the configuration. See “
Configuring Port
Addresses (FICON Management Style) ” on page 142 for details on using
this dialog box.
■ Click Delete to delete a stored configuration. A warning displays before
deletion.