Table 5: event codes, 5 event codes – HP StorageWorks 2.140 Director Switch User Manual
Page 173

Using Logs
171
Director Element Manager User Guide
Each log entry includes the following:
■
Date/Time—The date and time of the event on the director
■
Event—Events are identified by a unique code. Event codes include:
The following acronyms may display in this column for the port card:
—
GLSL
—G_Port, long wave, single-mode LC connector, 1 Gigabit
—
GSML
—G_Port, short wave, multi-mode, LC connector, 1 Gigabit
—
GXXL
—G_Port, mixed mode, LC connector, 1 Gigabit
—
FPM
—G_Port, small form factor pluggable (SFP) optics, FICON port
module, 1 Gigabit
—
UPM
—G_Port, small form factor pluggable (SFP) optics, universal port
module, 2 Gigabit
—
GSF2
—G_Port, small form factor pluggable (SFP) optics, universal port
module, 2 Gigabit
—
GLSR
—G_Port, short wave, single-mode, MT-RJ connector, 1 Gigabit
—
GXXR
—G_Port, mixed mode, MT-RJ connector, 1 Gigabit
—
GSMR
—G_Port, short wave, multi-mode, MT-RJ connector, 1 Gigabit
The chassis (slot) position for a non-redundant FRU is 0. The chassis
positions for redundant FRUs are 0, 1, and 2. The chassis positions for port
cards are 0 through 35, and slot 32 is unavailable.
■
Description—A short description of the event
Table 5: Event codes
Code
Event
000–199
System events
200–299
Power supply events
300–399
Fan module events
400–499
CTP card events
500–599
Port card events
600–699
SBAR card events
800–899
Thermal events