HP StorageWorks 2.140 Director Switch User Manual
Page 70
Monitoring and managing the Director
68
Director Element Manager User Guide
3
CTP card failure indicator—The blinking red and yellow diamond ( ) on
the CTP card with the amber LED illuminated indicates that the card has
failed.
4
Active CTP card indicator—The green LED on a CTP card illuminates to
indicate that the card is active. Since the redundant CTP card on the left has
failed, this CTP card has become the active card. If both CTP cards are
operational, no LEDs illuminate on the backup card, while the green LED
illuminates on the active CTP card.
5
Power, system error, and unit beaconing indicators—The green and amber
indicators on the far right of the front bezel simulate the power and system
error LEDs on the actual director bezel.
■
Power indicator—The green indicator simulates the power LED on the
actual director. When the indicator illuminates, the director is connected
to facility AC power and is operational. The indicator will be on if either
power supply is operating.
■
System error indicator—The amber system error light indicator
(illuminated in the Hardware Views as shown in
system error light on the actual director. When this indicator illuminates,
an event has occurred requiring immediate attention, such as a system,
fan, power supply, or port failure. View details of system errors by
choosing Event Log from the Logs menu on the menu bar. The indicator
in the Hardware View and the LED on the actual unit remains illuminated
until you clear the event by right-clicking on the director graphic, away
from an FRU, and choosing Clear System Error Light from the pop-up
menu.
Note:
If the amber LED flashes, this indicates that unit beaconing has been enabled for
the director. Enable or disable unit beaconing by right-clicking on the director graphic,
away from an FRU, and
choos
ing Enable Unit Beaconing from the pop-up menu.