beautypg.com

HP StorageWorks 2.140 Director Switch User Manual

Page 237

background image

Information and Error Messages

235

Director Element Manager User Guide

Another Element

Manager is currently

performing a firmware

install.

Only one instance of

the Element Manager

can install a firmware

version to the director

at a time.

Wait for the firmware

installation process to complete

and try the operation again.

Are you sure you want

to delete firmware

version?

This message requests

confirmation to delete

a firmware version.

Firmware library can

store up to 8 firmware

versions.

Click Yes to delete the firmware

version or No to abort the

operation.

Are you sure you want

to delete this address

configuration?

Confirmation to delete

the selected address

configuration.

Click Yes to confirm the

deletion of the address

configuration or No to cancel

the operation.

Are you sure you want

to send firmware

version?

This message requests

confirmation to send a

firmware version from

the HAFM appliance’s

firmware library to the

director. Firmware

library can store up to

8 firmware versions.

Click Yes to send the firmware

version or No to abort the

operation.

Cannot change Port

Type while

Management Style is

FICON without

SANtegrity feature.

Please contact your

sales representative.

Firmware is below the

required level and you

attempted to change a

port type in the

Configure Ports dialog

box while FICON

management style, but

the optional

SANtegrity Binding

feature is not installed.

Informational message. If the

firmware is below the required

level, install SANtegrity Binding

before changing port types in

the Configure Ports dialog box

while in FICON management

style.

Cannot disable Switch

Binding while

Enterprise Fabric

Mode is active and the

switch is Online.

You attempted to

disable Switch Binding

through the Switch

Binding Change State

dialog box, but

Enterprise Fabric

Mode is enabled.

You must either disable

Enterprise Fabric Mode using

the Enterprise Fabric Mode

dialog box in the

HAFM

application or set the switch

offline before you can disable

Switch Binding.

Table 10: Element Manager Messages (Continued)

Message

Description

Action

This manual is related to the following products: