HP StorageWorks 2.140 Director Switch User Manual
Page 24

Overview
22
Director Element Manager User Guide
■
Configure a nickname to display instead of the WWN for the director and for
attached node devices.
■
Configure Port Binding.
■
Configure port address configurations (FICON management style only).
■
Configure SNMP trap recipients and community names.
■
Configure the FICON and Open Systems Management Server features if
optional Open Systems Management Server is installed.
■
Configure Switch Binding if optional SANtegrity Binding feature is installed.
■
Configure Open Trunking if optional Open Trunking feature is installed.
■
Configure the management style between Open Systems and FICON
management.
■
Configure the director name, location, description, and contact person.
■
Configure the data speed for the director (Director 2/64 only) and individual
ports.
■
Configure threshold alerts for ports.
■
Control individual Fibre Channel ports by blocking/unblocking operation,
enabling LIN alerts and Port Binding, setting data speeds, and running
internal and external loopback diagnostics.
■
Display FRU properties such as the FRU name, physical position in the
director (chassis slot number), active/failed state, part number, and serial
number.
■
Display information for individual Fibre Channel ports, such as the port name,
port number, Fibre Channel address, operational state, type of port, and login
data.
■
Display information on nodes attached to ports.
■
Display port performance and statistics.
■
Display vital product data for the director, such as the system name,
description, contact person, location, status, model number, firmware and
Engineering Change (EC) level, and manufacturer.
■
Enable beaconing for ports and the director unit.
■
Enable channel wrap mode (FICON management style only).
■
Maintain a port address library (FICON management style only).