HP StorageWorks 2.140 Director Switch - Manual (Page 165)

Configuring the Director
163 Director Element Manager User Guide
2. Choose the folder where you want to save the file.
3. Type in a file name and extension in the File name field.
4. Click Save. The file saves to the specified folder as an ASCII text file.
Enabling Embedded Web Server
Use the following steps to enable EWS:
1. At the Hardware View page, click Configure > Enable Web Server.
Choosing Enable Web Server automatically places a check mark in the
check box.
2. Click Enable Web Server again to remove the check mark and disable the
EWS interface. When disabled, remote users cannot access the interface.
For complete procedures on using EWS, refer to HP StorageWorks Embedded
Web Server User Guide.
Enabling Telnet
Use the following steps to enable Telnet:
1. At the Hardware View, click Configure > Enable Telnet. Choosing Enable
Telnet automatically places a check mark in the check box.
2. Click Enable Telnet again to remove the check mark and disable Telnet
access. When disabled, remote users cannot access the director through
Telnet.