HP StorageWorks 2.140 Director Switch User Manual
Page 40
Overview
38
Director Element Manager User Guide
IPL
Click this option to initiate an initial program load on the director. A dialog box
displays to allow you to confirm the IPL. Note that an IPL does not affect any
configuration settings done through the Element Manager. Port operation is not
interrupted during the IPL.
For instructions, refer to the HP StorageWorks Director 2/64 Service Guide for the
Director 2/64 and the HP StorageWorks Director 2/140 Service Guide for the
Director 2/140.
Set Online State
Click this option to display the Set Online State dialog box. Use this dialog box to
change the online state of the director to offline or online.
Firmware Library
Click this option to display the Firmware Library dialog box. This dialog box
displays all firmware versions currently installed on the HAFM appliance that can
be downloaded to directors. Use this dialog box to add a new firmware version to
the HAFM appliance’s hard disk, modify the description displayed for an existing
version, delete a version from the PC, or download (send) a version for operation
on a director.
For additional information on using this option, refer to the HP StorageWorks
Director 2/64 Service Guide for the Director 2/64 or the HP StorageWorks
Director 2/140 Service Guide for the Director 2/140.
Enable E-Mail Notification
The Simple Mail Transfer Protocol (SMTP) server, e-mail recipient addresses, and
e-mail notification are configured in the HAFM application (not in the director’s
Element Manager) for all products. However, the E-Mail Notification option on
the Element Manager’s Maintenance menu must be enabled (checked) for e-mail
notification to occur for the specific director.
The default setting for the Enable E-Mail Notification option is enabled
(checked). To disable the option, click Maintenance > Enable E-Mail
Notification to clear the check box.
For additional information on using this option, see “