HP StorageWorks 2.140 Director Switch - Manual (Page 64)

Monitoring and managing the Director
62 Director Element Manager User Guide
Hardware View
Using this graphical view of the director, you can view status symbols and
simulated light emitting diode (LED) indicators, display data. You can also use
mouse functions to monitor status and obtain vital product information for the
director and its hardware components. To display the Hardware View, choose
Hardware from the view tabs on the Element Manager window.
Identifying FRUs
Move the mouse pointer over parts of the director graphic in the Hardware View to
display labels identifying each hardware component and its slot position in the
chassis relative to identical components installed in the director. Components
include:
■ Port cards.
— The Director 2/64 can contain up to 16 port cards, slot positions 15
through 0 (left to right).
— The Director 2/140 can contain up to 32 port cards in the front of the unit
(slot positions 0–1) and up to three additional port cards in the rear (slot
positions 33–35). Note that blank slot position 32 relates to ports
128–131, which are internal ports.
As you move the mouse pointer over each card, labels display, identifying the
card's slot number and port technology. Acronyms that may display to identify
port technology, such as UPM, GSML, GXXL, FPM, UPM, GLSR, GSMR,
GLSL, and GXXR, also display in the FRU column of the FRU List View.
See “
FRU List View ” on page 107 for details.
■ Control processor (CTP) cards. Two CTP cards are installed, slot positions 1
and 0 (left to right).
■ Power supply modules.
— Director 2/64—Two modules are installed, slot positions 1 and 0 (left to
right).
— Director 2/140—Two modules are installed, slot positions 1 and 0 (left to
right).