HP StorageWorks 2.140 Director Switch - Manual (Page 65)

Monitoring and managing the Director
63 Director Element Manager User Guide
■ Cooling fan modules.
— Director 2/64—Two modules are installed, slot positions 1 and 0 (left to
right).
— Director 2/140—Three modules are installed, slot positions 2, 1, and 0
(left to right).
■ Serial Crossbars (SBAR).
— Director 2/64—Two SBARs are installed, slot positions 1 (bottom) and
0 (top).
— Director 2/140—Two SBARs are installed, slot positions 0 (bottom) and
1 (top).
Monitoring Director Operation
You can monitor the operating status of the director using the Director Status table
on the Hardware View and the status bar at the bottom of the window.
Director Status Table
The Status table at the top of the Hardware View displays the director’s
operational status, operational state, name, description, and location.
■ Status—See“ Port Operational States ” on page 109 for the meaning of the text
that displays in the director Status table and the corresponding status symbols
that display on the status bar.
■ State—The State field displays one of the following:
— Offline—When the director is Offline , all ports are offline. The ports
cannot accept a login from an attached device or cannot connect to other
directors. You can configure this state through the Set Online State dialog
box. See “
Set Online State ” on page 183 for instructions.
— Online—All unblocked ports are able to connect with devices. You can
configure this state through the Set Online State dialog box. See “ Set
Online State ” on page 183 for instructions. Note that the director
automatically goes online after a power-up, an initial machine load (IML),
or an initial program load (IPL).