HP StorageWorks 2.140 Director Switch User Manual

Page 139

Configuring the Director

137

Director Element Manager User Guide

■

Speed

— Set All To 1 Gb/sec—Sets the port optics to a 1 Gb/s data rate.

— Set All To 2 Gb/sec—Sets the port optics to a 2 Gb/s data rate.

— Set All To Negotiate—Allows the port to negotiate the data rate with the

attached device.

Note:

Your director model, firmware, and port cards may not allow 2 Gb/s data

speeds.

■

Port Binding

— Bind All WWNs—Places a check mark in all check boxes in this column

and binds each port to the device with the WWN or nickname entered in
the Bound WWN column for that port.

— Unbind All WWNs—Removes check marks in all check boxes in this

column. A device with any WWN can attach to all ports.

— Bind All Ports to Attached WWN—Places a check mark in all check

boxes in this column and binds each port to the device currently attached
to that port. The Bound WWN column will display that device’s WWN.

— Bind Port to Attached WWN—Places a check mark in the check box for

the port where you clicked to display the menu. This binds that port to the
device currently attached to that port. The Bound WWN column will
display that device’s WWN.

— Clear All Bound WWNs—Clears all WWNs listed in the Bound WWN

column.

■

Bound WWN