HP StorageWorks 2.140 Director Switch - Manual (Page 233)

Information and Error Messages
231 Director Element Manager User Guide
This switch is currently
part of this fabric and
cannot be removed
from the Fabric
Membership List.
Isolate the switch from
the fabric prior to
removing it from the
Fabric Membership
List.
You attempted to
remove a switch from
the Fabric
Membership List using
the Fabric Binding
option, but the switch
is still part of the
fabric.
Remove the switch from the
fabric by setting the switch
offline or blocking the E_Port
where the switch is connected.
This World Wide
Name was not
accepted. The World
Wide Name and
Domain ID must be
unique in the Fabric
Membership List.
You attempted to add
a detached switch to
the Fabric
Membership List
through the Fabric
Binding option
(SANtegrity Binding
feature), but an entry
already exists in the
Fabric Membership
List with the same
World Wide Name
(WWN).
Enter a unique World Wide
Name for the switch in the Add
Detached Switch dialog box.
Too many members
defined.
The maximum number
of zone members that
can be defined was
reached.
Delete an existing zone
member before adding a new
zone member.
You do not have a
compatible version of
the management
server software. In
order for the HAFM
application to function
properly, a compatible
version must be
installed on the client
machine. Click OK to
install a compatible
version.
The HAFM application
version running on the
HAFM appliance
differs from the version
running on the remote
workstation (client). A
compatible version
must be downloaded
from the HAFM
appliance.
Download a compatible
version of the HAFM
application to the remote
workstation (client) using the
Web install procedure.
You do not have rights
to perform this action.
Configured user rights
do not allow this
operation to be
performed.
Verify user rights with the
customer’s network
administrator and change as
required using the Configure
Users dialog box.
Table 9: HAFM Messages (Continued)
Message Description Action