HP StorageWorks 2.140 Director Switch - Manual (Page 111)

Monitoring and managing the Director
109 Director Element Manager User Guide
Port Operational States
Table 4 describes the port operational states and the LED and attention indicators
that display in the Hardware View and Port List View.
Table 4: Port states and indicators
Port Indicators
Port State Green Amber
Alert
Indicator 1 Description
Beaconing Off or On Blink Yellow
Triangle
The port is beaconing. The amber port LED
blinks once every two seconds to enable
users to find a specific port. Enable
beaconing through the port’s menu on the
Port Card View, Port List View, or
Performance View.
Inactive Off Off Yellow
Triangle
The switch port is inactive. Reasons for this
state display in the Reason field of the Port
Properties dialog box.
Note that if port optics have also failed, the
amber LED will be on.
Invalid
Attachment
On Off Yellow
Triangle
The reasons for this state display in the
Reason field of the Port Properties dialog
box.
Link Incident Off Off Yellow
Triangle
A link incident occurred on the port. The
status symbol displays in the Port List View,
Port Card View, and Hardware View.
Link Reset Off Off Yellow
Triangle
The director and the attached device are
performing a link reset operation to recover
the link connection. Ordinarily, this is a
transient state that should not persist.
No Light Off Off None No signal (light) is being received on the
director port. This is a normal condition
when there is no cable plugged into the port
or when the power of the device attached to
the other end of the link is off.