HP StorageWorks 2.140 Director Switch - Manual (Page 200)

Optional Features
198 Director Element Manager User Guide
3. Click the check box in the Host Control Prohibited field to display a check
mark and to prohibit the host management program from changing
configuration and connectivity parameters on the switch. In this case, the host
program has read-only access to configuration and connectivity parameters.
Click the check box when it contains a check mark. This removes the check
mark and allows a host program to change configuration and connectivity
parameters on the switch.
4. To activate changes and close the dialog box, click Activate.
5. If you are finished configuring the switch, you can back up the configuration
data.
SANtegrity Features
SANtegrity includes a set of features that enhance security in SANs (Storage Area
Networks) that contain a large and mixed group of fabrics and attached devices.
Through these features, you can allow or prohibit switch attachment to fabrics and
device attachment to switches. These features are enabled by purchasing a feature
key, then enabling the key through the Configure Feature Key dialog box.
SANtegrity Binding features include:
■ Fabric Binding
■ Switch Binding
Enterprise Fabric Mode—Although this is not a keyed feature, the SANtegrity
Fabric Binding and Switch Binding must be installed before you can use
Enterprise Fabric Mode function through the HAFM Fabrics menu.
Fabric Binding
This feature is managed through the Fabric Binding option, available through the
Fabrics menu in HAFM when the Fabrics tab is selected. Using Fabric Binding,
you can allow specific switches to attach to specific fabrics in the SAN. This
provides security from accidental fabric merges and potential fabric disruption
when fabrics become segmented because they cannot merge.