HP StorageWorks 2.140 Director Switch - Manual (Page 72)

Monitoring and managing the Director
70 Director Element Manager User Guide
Obtaining Hardware Information
This section explains how to access the FRU Properties, Port Properties, and
Director Properties dialog boxes.
Displaying FRU Information
Double-click a CTP card, power supply, cooling fan module, or SBAR card in the
Hardware View to display an FRU Properties dialog box. This dialog box displays
the FRU name, slot position relative to identical FRUs installed in the chassis,
active or failed state, beaconing state (CTP card and SBAR card) part number, and
serial number. For the CTP card’s dialog box, the Speed Capability of the card
displays as either
1 Gig or 2 Gig .
Figure 14: FRU Properties dialog box
Note: You can display a properties dialog box for all FRUs by right-clicking on the FRU
and
choos
ing FRU Properties from the menu.
Display a Properties dialog box for a port card by right-clicking on a card and
choosing FRU Properties from the menu. To display a properties dialog box for
an individual port, you must be in the Port Card View. See “
Port Card View ” on
page 78 for details.
Figure 15: Port Card FRU Properties dialog box