HP Integrated Lights-Out 2 - Manual (Page 82)

The Remote Console Settings page includes three tabs:
Settings
•
High Performance Mouse settings can help alleviate remote console mouse synchronization
issues, but this feature is not supported on all operating systems. The effects of changing the
settings take place when remote console is started or restarted. The following options are
available:
— Disabled – Enables the mouse to use the relative coordinates mode which is compatible
with most host operating systems.
— Enabled – Enables the mouse to use the absolute coordinates mode, eliminating
synchronization issues on supported operating systems.
— Automatic – Enables iLO 2 to select the appropriate mouse mode when the iLO 2 driver
is loaded on the host operating system. The selected mode is persistent unless a different
mode is indicated when the operating system driver is loaded or if you choose another
setting.
•
Remote Console Acquire enables one user to take the remote console session away from
another user. This setting enables or disables the acquire functionality.
•
Shared Remote Console enables multiple users to view and control the server console at the
same time. This setting enables or disables the shared functionality.
•
Interactive Console Replay allows you to replay the captured console video of boot and fault
sequences along with user-initiated manual console captures.
•
The Key-Up/Key-Down setting allows you toggle between using the HID report keyboard
model and the ASCII and ESC codes keyboard model in the IRC. The HID report keyboard
model is enabled by default but might cause repeating characters on high latency networks.
If you experience repeating characters when using IRC, set Key-Up/Key-Down to Disabled.
•
Boot/Fault Console Capture enables you to capture console video to internal buffers of any
boot and fault sequences. Internal buffer space is limited to the capture of the most recent boot
or fault sequence. Buffer space is limited. The more dynamic and the higher the graphical
resolution of the server console, the less amount of data that can be stored in the buffer. Select
which type of video to capture using the following options:
— Console Capture buffer allows you to select which type of console sequence to capture.
You can enable either buffer or enable both buffers at the same time. The buffers share
the same internal data area, so enabling both reduces the amount of console video that
82 Using iLO 2