HP Integrated Lights-Out 2 - Manual (Page 33)

Configuring iLO 2 access
The iLO 2 firmware enables you to configure which services are enabled on iLO 2 and user access
to iLO 2. To configure iLO 2 services options, click Administration>Access. The Services page (tab)
appears. To configure iLO 2 access options), click Administration>Access>Options (tab). You must
have the Configure iLO 2 Settings privilege to modify iLO 2 services and access options. For more
information, see
“Access options” (page 38) .
Services options
The Services tab enables you to select which services you want to enable on iLO 2, including SSH,
SSL, Remote Console, Telnet, and Terminal Services. The Services tab also enables you to set the
ports for each selected option. Settings on the Services page apply to all iLO 2 users. You must
have the Configure iLO 2 Settings privilege to modify settings on this page.
To access Services, click Administration>Access>Services. Click Apply to save updated information.
You must restart iLO 2 before any changes take effect. If any changes have been made to enable
or disable Lights-Out functionality, clicking Apply terminates your browser connection and restarts
iLO 2. You must wait at least 30 seconds before attempting to reestablish a connection.
The Services tab includes the following settings:
Description Default value Parameter
This setting enables you to specify whether the SSH feature on
the iLO 2 is enabled or disabled. Enabled Secure Shell (SSH) Access
This setting enables you to configure the iLO 2 SSH port to be
used for SSH communications. 22 Secure shell (SSH) Port
Configuring iLO 2 access 33