HP Integrated Lights-Out 2 - Manual (Page 65)

•
Domain Name is the name of the domain where the iLO 2 subsystem resides. This name is
assigned by DHCP (if DHCP is enabled). Enabling DHCP allows you to configure the following
DHCP options:
— Use DHCP Supplied Gateway – Toggles if iLO 2 uses the DHCP server-supplied gateway.
If not, enter an gateway address in the Gateway IP Address box.
— Use DHCP Supplied DNS Servers – Toggles if iLO 2 uses the DHCP server-supplied DNS
server list. If not, enter the DNS server address in the Primary, Secondary, and Tertiary
DNS Server fields.
— Use DHCP Supplied WINS Servers – Toggles if iLO 2 uses the DHCP server-supplied
WINS server list. If not, enter the WINS server address in the Primary and Secondary
WINS Server fields.
— Use DHCP Supplied Static Routes – Toggles if iLO 2 uses the DHCP server-supplied static
route. If not, enter the static route address in Static Route #1, Static Route #2, or Static
Route #3 fields.
— Use DHCP Supplied Domain Name – Toggles if iLO 2 uses the DHCP server-supplied
domain name. If not, enter a domain name in the Domain Name box.
•
WINS Server Registration toggles if iLO 2 registers its name with a WINS server.
•
DDNS Server Registration toggles if iLO 2 registers its name with a DDNS server.
•
Ping Gateway on Startup option causes iLO 2 to send four ICMP echo request packets to the
gateway when iLO 2 initializes. This option ensures that the ARP cache entry for iLO 2 is
up-to-date on the router responsible for routing packets to and from iLO 2.
•
DHCP Server is the IP address of the DHCP server. This field cannot be assigned. It is received
from DHCP if DHCP is enabled and represents the last known valid DHCP server address.
•
Primary, Secondary, and Tertiary DNS Server are the IP addresses of the DNS servers. If
supplied by the DHCP server, these fields are automatically populated. Otherwise, enter the
IP addresses manually.
•
Primary and Secondary WINS Server are the IP addresses of the WINS servers. If supplied
by the DHCP server, these fields are automatically populated. Otherwise, enter the IP addresses
manually.
•
Static Route #1, Static Route #2, and Static Route #3 (destination, gateway) are the network
destination gateway addresses. Enter up to three network destination/gateway routing pairs.
SNMP/Insight Manager settings
The Management option of the Administration section displays the SNMP/Insight Manager Settings
page. The SNMP/Insight Manager Settings page enables you to configure SNMP alerts, generate
a test alert, and configure integration with HP SIM.
Enabling SNMP alerts
iLO 2 supports up to three IP addresses to receive SNMP alerts. Typically, the addresses used are
the same as the IP address of the HP SIM server console.
Only users with the Configure iLO 2 Settings privilege can change these settings. Users that do
not have the Configure iLO 2 Settings privilege can only view the assigned settings.
The following alert options are available in the SNMP/Insight Manager Settings screen:
•
SNMP Alert Destination(s)
•
iLO 2 SNMP Alerts
•
Forward Insight Manager Agent SNMP Alerts
SNMP/Insight Manager settings 65