HP Integrated Lights-Out 2 - Manual (Page 22)

1. Click the iLO 2 graphic.
2. Select Software and Drivers.
Microsoft device driver support
The device drivers that support the iLO 2 are part of the PSP that is located on the HP website at
http://www.hp.com/support or on the SmartStart CD. Before you install the Windows drivers,
obtain the Windows documentation and the latest Windows Service Pack.
iLO 2 prerequisite files:
•
CPQCIDRV.SYS – Provides the iLO 2 Management Interface Driver support.
•
CPQASM2.SYS , SYSMGMT.SYS, and SYSDOWN.SYS – Provide the iLO 2 Advanced Server
Management Controller Driver support.
PSP for Microsoft Windows products includes an installer that analyzes system requirements and
installs all drivers. The PSP is available on the HP website at
http://www.hp.com/support or on
the SmartStart CD.
To install the drivers in the PSP:
1. Download the PSP from the HP website at http://www.hp.com/support .
2. Run the SETUP.EXE file included in the download, and then follow the installation instructions.
For additional information about the PSP installation, read the text file included in the PSP download.
Linux device driver support
You can download the LSP files containing the iLO 2 driver, the foundation agents, and health
agents from the HP website at
http://www.hp.com/support . The instructions on how to install or
update the iLO 2 driver are available on the website. The HP Management Agents for Linux are:
•
RPM package (hp-snmp-agents) combines the health driver, IML viewer, foundation agents,
health agent, and standard equipment agent into one package.
•
RPM package (hp-iLO) combines the RIB driver, rack daemon, RIB agent, and rack agent
into one package.
To load the health and iLO 2 driver packages, enter the following commands:
rpm -ivh hp-snmp-agents-d.vv.v-pp.Linux_version.i386.rpm
rpm -ivh hp-iLO-d.vv.v-pp.Linux_version.i386.rpm
where:
d is the Linux distribution and version
vv.v-pp are version numbers
To remove the health and iLO 2 drivers, enter the following commands:
rpm -e hp-snmp-agents
rpm -e hp-iLO
For additional information, see the HP Software and Drivers website at http://www.hp.com/
support .
Novell NetWare device driver support
The device drivers required to support iLO 2 are part of the PSP that is located on the SmartStart
CD and the HP website at
http://www.hp.com/support . The PSP for Novell NetWare includes an
installer that analyzes system requirements and installs all drivers.
iLO 2 requires the following files:
•
The CPQHLTH.NLM file provides the Health Driver for Novell NetWare.
•
The CPQCI.NLM file provides iLO 2 Management Interface Driver support.
22 Setting up iLO 2