HP Integrated Lights-Out 2 - Manual (Page 184)

Event log explanation Event log display
Displays when an error has occurred in iLO 2 and iLO 2
has reset itself. If this issue persists, call customer support. iLO 2 reset by watchdog
Displays when the server resets iLO 2. iLO 2 reset by host
Displays when a non-critical error has occurred in iLO 2
and iLO 2 has reset itself. If this issue persists, call customer
support. Recoverable iLO 2 error, code #
Displays when the SMNP trap does not connect to the
specified IP address. SNMP trap delivery failure: IP address
Displays when the SNMP trap does not connect to the
specified IP address. Test SNMP trap alert failed for: IP address
Displays when the SNMP trap does not connect to the
specified IP address. Power outage SNMP trap alert failed for: IP address
Displays when the SNMP trap does not connect to the
specified IP address. Server reset SNMP trap alert failed for: IP address
Displays when the SNMP trap does not connect to the
specified IP address. Illegal login SNMP trap alert failed for: IP address
Displays when the SNMP trap does not connect to the
specified IP address. Diagnostic error SNMP trap alert failed for: IP address
Displays when the SNMP trap does not connect to the
specified IP address. Host generated SNMP trap alert failed for: IP address
Displays when the SNMP trap does not connect to the
specified IP address. Network resource shortage SNMP trap alert failed for: IP
address
Displays when the network is connected to iLO 2. iLO 2 network link up
Displays when the network is not connected to iLO 2. iLO 2 network link down
Displays when a user starts a firmware upgrade. iLO 2 Firmware upgrade started by: User
Displays when a user resets the host server. Host server reset by: User
Displays when a user powers off a host server. Host server powered OFF by: User
Displays when a user powers on a host server. Host server powered ON by: User
Displays when a user begins using a Virtual Floppy. Virtual Floppy in use by: User
Displays when a user logs on a Remote Console session. Remote Console login: User
Displays when a Remote Console session is closed. Remote Console Closed
Displays a failed console login and IP address. Failed Console login - IP Address: IP address
Displays when a local user is added. Added User: User
Displays when a local user is deleted. User Deleted by: User
Displays when a local user is modified. Modified User: User
Displays when a valid user logs on to iLO 2 using an
Internet browser. Browser login: User
Displays when a valid user logs off iLO 2 using an Internet
browser. Browser logout: User
Displays when a browser login attempt fails. Failed Browser login—IP Address: IP address
Displays when an authorized user logs on using the Remote
Console port. Remote Console login: User
184 Troubleshooting iLO 2