HP Integrated Lights-Out 2 - Manual (Page 74)

4 Using iLO 2
System status and status summary information
When you first access iLO 2, the interface displays the Status Summary page with system status
and status summary information, and provides access to health information, system logs, and
Insight Agent information. The options available in the System Status section are: Summary, System
Information, iLO 2 Log, IML, Diagnostics, iLO 2 User Tips, and Insight Agents.
The Status Summary page displays high-level details about the system and iLO 2 subsystem, as
well as links to commonly used features. To access the Status Summary page from other areas of
the iLO 2 interface, click System Status>Summary.
Status information includes:
•
Server Name – Displays the name of the server and is a link to Administration>Options>Access.
•
UUID – Displays the ID of the server.
•
Server Serial Number/Product ID – Displays the serial number of the server, which is assigned
when the system is manufactured. You can change this setting using the system RBSU during
POST. Product ID distinguishes between different systems with similar serial numbers. Although
the Product ID is assigned when the system is manufactured, you can change this setting using
the system RBSU during POST.
•
System ROM – Displays the family and version of the active system ROM. If the system supports
a backup system ROM, the backup date is also shown.
•
System Health – Summarizes the condition of the monitored subsystems including overall status
and redundancy (ability to handle a failure) and is a link to System>Status>System Information
Summary.
•
Internal Health LED – Represents the server internal health indicator (if supported). It summarizes
issues with fans, temperature sensors, VRMs, and other monitored subsystems in the server.
For more information, see
“System Information Summary” (page 75) .
•
TPM Status – Displays TPM status configuration. If the host system or System ROM does not
support TPM. TPM Status does not appear in Status Summary page. For more information,
see
“Trusted Platform Module support” (page 43) .
•
Server Power – Displays the current power state of the server (ON/STANDBY) when the page
was loaded and is a link to Server>Power Management. Users with virtual power and reset
privilege can also use the Momentary Press button.
74 Using iLO 2