HP Integrated Lights-Out 2 - Manual (Page 134)

1. Download and review the scripting and command line resource guide
at http://h20000.www2.hp.com/bizsupport/TechSupport/DocumentIndex.jsp?
contentType=SupportManual&lang=en&cc=us&docIndexId=64179&taskId=135&
prodTypeId=18964&prodSeriesId=1146658
.
2. Write a script that configures iLO 2 for schema-free directories support and run it. The following
script can be used as a template.
Schema-free HPLOMIG-based setup
HPLOMIG is the easiest way to set up a large number of LOM processors for directories. To use
HPLOMIG , download the HPLOMIG utility and additional documentation from the HP website at
http://www.hp.com/servers/lights-out . HP recommends using HPLOMIG when configuring many
LOM processors for directories. For more information on using HPLOMIG, see “HPLOMIG directory
migration utility” (page 162) .
Schema-free setup options
Setup options are the same regardless of which method (browser, HPLOMIG, or script) you use to
configure the directory.
After enabling directories and selecting the Schema-free option, you have the following options.
Minimum Login Flexibility
•
Enter the directory server's DNS name or IP address and LDAP port. Typically, the LDAP port
for an SSL connection is 636.
•
Enter the distinguished name for at least one group. This group can be a security group (for
example: CN=Administrators,CN=Builtin,DC=HP,DC=com) or any other group as
long as the intended iLO 2 users are members of the group.
With a minimum configuration, you can log in to iLO 2 using your full distinguished name
and password. You must be a member of a group that iLO 2 recognizes.
134 Directory services