HP Integrated Lights-Out 2 - Manual (Page 34)

Description Default value Parameter
This setting enables you to connect a Telnet client to the Remote
Console/Telnet port, providing access to the iLO 2 CLP. The
following settings are valid: Disabled Telnet Access
• Enabled – iLO 2 enables Telnet clients to connect to the
Remote Console/Telnet port. Network port scanners can
detect that iLO 2 is listening on this port. Unencrypted
communication is allowed between the iLO 2 CLP and Telnet
clients.
• Disabled – iLO 2 does not allow Telnet clients to connect to
the Remote Console/Telnet port. Network port scanners will
not normally detect if this port is open on iLO 2. iLO 2 listens
on this port for a few seconds when the Remote Console is
opened, but Telnet connections are not accepted.
Communication between the iLO 2 and Remote Console is
always encrypted.
This setting enables you to specify which port the iLO 2 Remote
Console uses for remote console communications. 23 Remote Console/Telnet Port
This setting enables you to specify which port the embedded
web server in iLO 2 uses for unencrypted communications. 80 Web Server Non-SSL Port
This setting enables you to specify which port the embedded
web server in iLO 2 uses for encrypted communications. 443 Web Server SSL Port
This setting enables you to control the ability to support a
connection through iLO 2 between a Microsoft Terminal Services Disabled Terminal Services Passthrough
client and Terminal Services server running on the host. The
following settings are valid:
• Automatic – When remote console is started, the Terminal
Services client is launched.
•
Enabled – The passthrough feature is enabled and can
connect the Terminal Services client directly to the iLO 2
without logging-into the iLO 2.
• Disabled – The passthrough feature is off.
This setting enables you to specify the Terminal Services Port
that the iLO 2 uses for encrypted communications with Terminal 3389 Terminal Services Port
Services passthrough software on the server. If the Terminal
Services port is configured to anything other than the default,
you must manually change the port number.
This setting enables you to specify whether the virtual media
port on the iLO 2 is enabled or disabled. The following settings
are valid: Enabled Virtual Media
•
Enabled – iLO 2 enables the Virtual media port.
• Disabled – iLO 2 disables the Virtual media port.
This setting enables you to specify the port for virtual media
support in iLO 2 communications. 17988 Virtual Media Port
This setting enables you to specify the Shared Remote Console
Port. The Shared Remote Console Port is opened on the client 9300 Shared Remote Console Port
to allow additional users to connect to remote console in a
peer-to-peer fashion. This port is only open when Shared Remote
Console is in use.
This setting enables you to specify the Console Replay Port. The
Console Replay Port is opened on the client to enable the 17990 Console Replay Port
transfer of internal capture buffers to the client for replay. This
34 Configuring iLO 2