HP StorageWorks XP48 Disk Array - Manual (Page 92)

Managing Storage Pools 92
Figure 5-16 Analyze per Subsystem - Storage Pool Subwindow when Details is Selected
Figure 5-17 Analyze per Subsystem - Storage Pool Subwindow when the Show Information Button is Clicked
5-7 Viewing a List of Unallocated Volumes on a Host
In the List Unallocated LDEVs - Storage Pool subwindow, you can view the volumes not allocated on the host.
You can view the size, subsystem name, host, type, array group, RAID level, emulation type, attributes, copy
type, copy role, default controller, external subsystem, SLPR, and CLPR for each volume. When you select a
subsystem from the Subsystem pull-down list, only the volumes in the specified subsystems are displayed. For
details about the displayed items, see Help for the windows.
A maximum of 16,384 volumes can be displayed in the list of volumes. If you want to display information for
16,385 or more volumes, specify storage pool settings by following the procedure in
5-1-3 .
NOTE: Information not reflecting the latest status might be displayed when the storage subsystem
information is being updated. In such a case, a warning message is displayed, so wait a while and then re-
execute the view operation.
NOTE: If the volume is operated using partitioned storage administrator permissions, and different SLPRs or
CLPRs are set for the LDEV that configures the selected volume, or the SLPR for the selected volume is
different from the one for the assigned port, an error message is displayed indicating that the operation
cannot be performed by the partitioned storage administrator. In such a case, use Device Manager to check
which LDEV is inconsistent, and then reset the SLPR and CLPR information for the storage subsystem.
To view the volumes:
1. In the navigation frame, select Storage Pool. In the method frame, the Storage Pool subwindow is
displayed. In the information frame, the Show Properties - Storage Pool subwindow is displayed.