HP StorageWorks XP48 Disk Array - Manual (Page 175)

Troubleshooting 175
Table 11-15 Provisioning Manager Server Messages (continues on the following pages)
Error Code Error Message Description and Recommended Action
KARF10224-W The LUN security settings do not match that of
the target file system. Make sure that
mismatching LUN security settings will not
cause problems. Cause: The LUN security is incompatible with the
LUN security of the target file system.
Action: Confirm the availability of the volume, and
then execute.
KARF10225-W The RAID level does not match that of the
target file system. Make sure that mismatching
RAID levels will not cause problems. Cause: The RAID level is incompatible with the
RAID level of the target file system.
Action: Confirm the availability of the volume, and
then execute.
KARF11002-E A connection error occurred when logging in to
Single Sign On Service. Cause: The Single Sign On Service is not
running, or a network error has occurred.
Action: Check the log of Common Component,
and then take appropriate action.
KARF11003-E An attempt to access Common Component
has failed. Provisioning Manager might not be
installed correctly. Cause: The program product information for
Provisioning Manager is not registered in
Common Component.
Action: Re-install, and then retry.
KARF11005-E A Single Sign On Service error occurred
during an access to Common Component. Cause: The status of the Single Sign On Service
is invalid.
Action: Check the log of Common Component,
and then take appropriate action.
KARF11006-E An internal error occurred during access to
Common Component. Cause: The status of the Single Sign On Service
is invalid.
Action: Contact the Support Center.
KARF11012-E An internal error occurred while the Common
Component database was being updated. Cause: An internal error occurred in the Common
Component database.
Action: Contact the Support Center.
KARF11013-E An attempt to update the Common
Component database has failed. The state
might be inconsistent. Cause: An attempt to access the Common
Component database has failed.
Action: Update the Common Component
database to the latest state. Set “true” for the
server.base.initialsynchro property in the
server.properties file of Device Manager, and then
restart the Device Manager server.
KARF11014-E An internal error occurred. Cause: An internal error occurred while
attempting to acquire the message ID.
Action: Contact the Support Center.
KARF11021-E An attempt to initialize the Common
Component linkage function has failed. Cause: An attempt to access the Common
Component database has failed.
Action: Check the log of Common Component,
and then take appropriate action.
KARF11023-E An attempt to delete information from the
Common Component database has failed. Cause: An attempt to access the Common
Component database has failed.
Action: Check the log of Common Component,
and then take appropriate action.
KARF12000-E The system environment is invalid. Cause: The system environment, necessary for
execution of license management, is invalid.
Action: Contact the Support Center.
KARF12001-E The entered license key is unusable. Cause: Possible causes are as follows:
• An invalid license key was entered.
• An attempt was made to register the
same license twice.
• The entered license was for a different
server.
Action: Enter the correct license key, and then
retry.
KARF12002-E An internal error occurred. Cause: An internal error occurred during license
processing.
Action: Contact the Support Center.
KARF12003-E The entered license key file is invalid. Cause: The license key entered for license
addition does not exist in the license key file.
Action: Enter the correct license key file, and then