HP StorageWorks XP48 Disk Array User Manual
Page 196
Troubleshooting 196
Table 11-17
Provisioning Manager Agent Messages (continues on the following pages)
Error Code
Error Message
Description and Recommended Action
KARF67002-E
The specified physical volume does not exist.
Cause
The host information recognized by the
Provisioning Manager server has not been
updated.
Action
Refresh the host information, and then retry
the operation.
KARF70000-E
Internal processing error.
Cause: An unexpected internal error occurred.
Action: Acquire the error information for
Provisioning Manager and Device Manager, and
then contact the Support Center.
KARF70001-E
Exception occurred = class name
Cause: An unexpected internal error occurred.
Action: Acquire the error information for
Provisioning Manager and Device Manager, and
then contact the Support Center.
KARF70002-E
The specified parameter is invalid.
Cause: The request was made with an invalid
value.
Action: Acquire the error information for
Provisioning Manager and Device Manager, and
then contact the Support Center.
KARF70003-I
Execution command = command, startTime =
command start time.
Cause: -
Action: No action is required.
KARF70004-E
Command execution error = command
Cause: A command execution error occurred.
Action: Depending on the contents of the error
message, revise the host status and application
settings, remove the cause of the error, and then
retry the operation.
KARF70005-E
Program Product is not installed.
Cause: The Agent information recognized by the
Provisioning Manager server has not been
updated.
Action: Refresh the host information, and then retry
the operation.
KARF70006-E
Program Product is not supported.
Cause: The Agent information recognized by the
Provisioning Manager server has not been
updated.
Action: Refresh the host information, and then retry
the operation.
KARF70007-W
An attempt to delete the file has failed. (file
name = file name)
Cause: An attempt to delete the file indicated in
this message has failed.
Action: No action is required.
KARF70008-E
The specified parameter is invalid.
Cause: The hldutil command returned an
unexpected execution result.
Action: Acquire the error information for
Provisioning Manager and Device Manager, and
then contact the Support Center.
KARF70009-E
The specified parameter length is invalid.
Cause: The hldutil command returned an
unexpected execution result.
Action: Acquire the error information for
Provisioning Manager and Device Manager, and
then contact the Support Center.
KARF70010-W
Command execution error = Command
execution result
Cause: A nonfatal error occurred during command
execution.
Action: No action is required.
KARF70012-I Waiting
wait time seconds before starting the
next command.
Cause: -
Action: No action is required.
KARF70013-I
Command execution result = command
execution result, endTime = command end
time.
Cause: -
Action: No action is required.
KARF70014-E
The execution result of the command is
invalid.
Cause: The command returned an unexpected
execution result.
Action: Acquire the error information for