HP StorageWorks XP48 Disk Array - Manual (Page 167)

Troubleshooting 167
Table 11-15 Provisioning Manager Server Messages (continues on the following pages)
Error Code Error Message Description and Recommended Action
KARF01003-E The version does not match the version
(Device-Manager-version) of Device Manager.
The Provisioning Manager server cannot start. Cause: The installed version of Device Manager
is not one of the prerequisite versions for
Provisioning Manager.
Action: Check the installed version of Device
Manager, and then install a correct version of
Provisioning Manager.
KARF01004-I The Provisioning Manager server has
stopped. Cause: n/a
Action: No action is required.
KARF01005-E An error occurred while the Provisioning
Manager server was being stopped. The
Provisioning Manager server could not stop.
(error-information) Cause: An error occurred during the stop
processing of the Provisioning Manager server.
For details about the cause, see the error
information.
Action: Contact the Support Center.
KARF01006-E An internal error occurred. Cause: An internal error occurred in the
Provisioning Manager server.
Action: Contact the Support Center.
KARF01007-E An unauthenticated user attempted access. Cause: A client performed an invalid access.
Action: Contact the Support Center.
KARF01008-E The user name or password is incorrect. User
authentication has failed. Cause: The specified user name or password is
incorrect.
Action: Revise the user name and password, and
then retry.
KARF01009-E The specified object does not exist in the
database. Cause: The specified object might have already
been deleted.
Action: Refresh the information by clicking
Refresh in the navigation frame.
KARF01011-I The Provisioning Manager server was started
in clean-up mode. Cause: n/a
Action: No action is required.
KARF01012-E A fatal error occurred. (error-information) Cause: A fatal error occurred in execution of the
Provisioning Manager server.
Action: Contact the Support Center.
KARF01014-E An error occurred while reading the property
file property-file. The default value default-
value will be set for the setting property-key,
and then startup will be performed. Cause: An error occurred at the time of read-out
of a property file.
Action: Check the property file.
KARF01015-W An invalid property value was specified in the
property file server.properties (key = property-
key, value = property-value). The default value
default-value will be used for startup. Cause: An invalid value is set for the setting item
in the property file (server.properties).
Action: Check the property file (server.properties).
KARF01016-I The default value default-value will be set and
then startup will be performed, because a
value for the setting property-key was not
specified in the property file server.properties. Cause: In the property file server.properties, there
is an item with no specified value.
Action: If necessary, specify a value in the
property file server.properties.
KARF01017-E User information for the logged-in user was
not found. (user = user-id) Cause: The user or user group information might
have been changed or deleted.
Action: Check the information registered for the
user or the user group.
KARF01018-E The logical group is not allocated to the user
group of the logged-in user. (user = user-id) Cause: The allocation of the logical group to the
user group of the logged-in user might have been
released.
Action: Check the information registered for the
user group of the logged-in user.
KARF01503-I Creation of the allocation plan has started.
parameter Cause: n/a
Action: n/a
KARF01504-I Creation of the allocation plan has finished.
return-value Cause: n/a
Action: n/a
KARF01505-E An error occurred during creation of the
allocation plan. Cause: The cause depends on the error that
occurred immediately before this one.
Action: Take action appropriate for the message
that was output immediately before this one.