Teledyne LeCroy Summit T28 PCIe Multi-lane Protocol Analyzer User Manual - Manual (Page 88)

Teledyne LeCroy Recording Rules Events
76 Summit T28 PCI Express Multi‐Lane Protocol Analyzer User Manual
5.19.2 Available Events Area
The Available Events area is in the left repository panel where you can park buttons that
you intend to use in the Main display area. The events in this panel do not affect the
recording. You can drag and drop events in the Main Display panel.
5.19.3 Main Display Area
The Main Display area is the right panel where you create trigger and filter conditions.
You create conditions by dragging buttons onto the Main display area from the Available
Events area. You then create additional conditions by right‐clicking a button and selecting
options from a pop‐up menu. See Creating Recording Rules.
5.19.4 Recording Rules Buttons
The Recording Rules toolbar allows you to create and edit recording rules:
5.20 Recording Rules Events
There are five sets of Events that can configured and actions can be set for every Event.
TABLE 5.2: Recording Rules Toolbar Buttons
New Event. Opens a
drop‐down menu with a
list of events. Show/Hide Channels. Shows/
hides the channel buttons.
Delete. Delete selected
event. Show properties.
Opens the Properties dialog for
the selected item.
Undo. Undoes last
action.
Zoom in
Zoom out
TABLE 5.3: Events and Event Actions
Event Pre-Defined Event Actions
Link State
Enter Electrical Idle
Exit Electrical Idle