Teledyne LeCroy Summit T28 PCIe Multi-lane Protocol Analyzer User Manual - Manual (Page 19)

Summit T28 PCI Express Multi‐Lane Protocol Analyzer User Manual 7
Chapter 3
Installation and Setup
The Summit T28™ is a standalone system.
You can begin PCI Express™ recordings after following the steps in this chapter.
3.1 Installing the PETracer Software
PETracer software operates all of Teledyne LeCroy’s PCI Express protocol Analyzer and
Exerciser products:
The PETracer software is installed on a Microsoft
®
Windows
®
‐based host machine and
serves as the interface for the Exerciser and/or Analyzer.
To install the PETracer software on the host machine:
1. Insert the CD into the CD‐ROM drive of the host machine that controls the Analyzer.
The installation window opens and displays links to the PETracer software, user
manuals, a readme file, and Acrobat Reader.
2. Select Install Software and follow the onscreen instructions.
The PETracer software installs automatically on the host machine’s hard disk. During
installation, all necessary drivers are loaded automatically.
3. To start the application, launch the PETracer program from the Start menu:
Start > Programs > LeCroy > PETracer > LeCroy PETracer