Teledyne LeCroy Summit T28 PCIe Multi-lane Protocol Analyzer User Manual - Manual (Page 18)

Teledyne LeCroy Summit T28 Rear Panel Description
6 Summit T28 PCI Express Multi‐Lane Protocol Analyzer User Manual
 Speed LEDs: Indicate speed setting the analyzer is using for Downstream direc‐
tion.
2.4 Summit T28 Rear Panel Description
The Summit T28 rear panel contains:
 Trigger In and Out connector: Provide external trigger capabilities. You can con‐
figure Summit T28 to trigger external equipment using Trigger Out. You can use
Trigger In to trigger the Analyzer from another device. The minimal pulse width
for Trigger In is 20ns.
 Sync In and Sync Out connector: Allow multiple Summit T28 analyzers to send
synchronization and control messages to one another
 USB Type B host machine connector: To connect the Analyzer to the host
machine using a USB connection.
 DC IN connector: 12 V, 5 A
 Power Switch (black): 1 = On and 0 = Off.