Teledyne LeCroy Summit T28 PCIe Multi-lane Protocol Analyzer User Manual - Manual (Page 61)

Summit T28 PCI Express Multi‐Lane Protocol Analyzer User Manual 49
Simple and Advanced Mode Teledyne LeCroy
5.4 Simple and Advanced Mode
The recording options can be defined in Simple or Advanced modes. The Simple
Recording and Advanced Recording options are the same in functionality, only the
interface displayed is different. The Simple Mode allows quick access to commonly used
options. The recording options are the same in both modes (See Figure 5.1: 1B).
Clicking on the Switch to Simple Mode toggles you between Simple and Advanced Mode
(see
Figure 5.2 on page 49 ).
Figure 5.2: Switch to Simple Mode Button
5.5 Trace Filename and Path
The Trace Filename and Path button sets the path and CATC Trace name for the recording.
It allows you to change the default file name and path for the recorded CATC Trace file.
The pre‐defined name is data.pex. See Figure 5.1: 1A
1. Select the Recording File Name button.
2. The Specify Trace File Name dialog opens to navigate to the directory you want.
3. Enter the new file name in the File name field.
4. Click the Save button.
This action does not do any immediate save operation. It just changes the default
name and uses it in subsequent recordings.