Teledyne LeCroy Summit T28 PCIe Multi-lane Protocol Analyzer User Manual - Manual (Page 111)

Summit T28 PCI Express Multi‐Lane Protocol Analyzer User Manual 99
Probe Settings Teledyne LeCroy
To use the external reference clock or for quick calibration click the appropriate
checkboxes to select them. If checked, calibration routine will only scan CTLE, if not
checked it will include DFE with the CTLE scan which will take longer, approximately 9
minutes.
Figure 5.52: Auto Configure Dialog
The calculated CTLE values are automatically displayed in the relevant lane field. Click
Save to save the settings or click Save As Default to save the settings as the default. Click
Load to save the settings as a .rec file as a PE Tracer Recording option to be used at a later
time. Click Reset to clear the settings (see
Figure 5.53 on page 100 ).