Teledyne LeCroy Summit T28 PCIe Multi-lane Protocol Analyzer User Manual - Manual (Page 205)

Summit T28 PCI Express Multi‐Lane Protocol Analyzer User Manual 193
Using the CATC Trace Navigator Teledyne LeCroy
Figure 10.20: Navigator Pane and Navigator Legend Dialog
The Navigator Legend dialog has areas corresponding to each of the panes. Each area has
check boxes that allow you to hide/display information in the pane. You can set the
priority of information displayed in the panes using the up and down triangles on the
right.
10.8.10 Using the Legend to Show/Hide Navigator Panes
To use the legend to show/hide an entire pane, use the checkbox next to the name of
each pane in the legend.
In the case of the Pre/Post Trigger and Errors areas, the action of show/hide in the legend
is identical to that provided by CATC Trace Navigator pop‐up menus.
In the case of the Traffic Types pane, there is no equivalent show/hide available through
the pop‐up menus.
10.8.11 Using the Legend to Set the Priority of Information Display
You can use the legend to set the priority of information displayed in the Pre/Post Trigger
Traffic Type panes. This is a two‐step process.
1. For a particular item in a pane, click the column next to the checkbox for the item.
That labels the item as currently active.
2. Next, use the up‐down at the lower‐right of the area to move the item higher or
lower in priority.