LevelOne FGL-2870 - Manual (Page 89)

Basic Configuration
3-35
3
Web – Click System, Line, Telnet. Specify the connection parameters for Telnet
access, then click Apply.
Figure 3-18 Enabling Telnet
CLI – Enter Line Configuration mode for a virtual terminal, then specify the
connection parameters as required. To display the current virtual terminal settings,
use the show line command from the Normal Exec level.
Console(config)#line vty 4-45
Console(config-line)#login local 4-46
Console(config-line)#password 0 secret 4-47
Console(config-line)#timeout login response 300 4-48
Console(config-line)#exec-timeout 600 4-48
Console(config-line)#password-thresh 3 4-49
Console(config-line)#end
Console#show line vty
4-56
VTY Configuration:
Password Threshold: 3 times
Interactive Timeout: 600 sec
Login Timeout: 300 sec
Console#