LevelOne FGL-2870 - Manual (Page 482)

Command Line Interface
4-116
4
Command Mode
Global Configuration
Example
radius-server acct-port
This command sets the RADIUS server network port for accounting messages. Use
the no form to restore the default.
Syntax
radius-server acct-port port-number
no radius-server acct-port
port-number - RADIUS server UDP port used for accounting messages.
(Range: 1-65535)
Default Setting
1813
Command Mode
Global Configuration
Example
radius-server auth-port
This command sets the RADIUS server network port for authentication messages.
Use the no form to restore the default.
Syntax
radius-server auth-port port-number
no radius-server auth-port
port-number - RADIUS server UDP port used for authentication
messages. (Range: 1-65535)
Default Setting
1812
Command Mode
Global Configuration
Example
Console(config)#radius-server 1 host 192.168.1.20 auth-port 181 timeout
10 retransmit 5 key green
Console(config)#
Console(config)#radius-server acct-port 181
Console(config)#
Console(config)#radius-server port 181
Console(config)#