LevelOne FGL-2870 - Manual (Page 599)

Automatic Traffic Control Commands
4-233
4
Automatic Traffic Control Commands
Automatic Traffic Control (ATC) configures bounding thresholds for broadcast and
multicast storms which can be used to trigger configured rate limits or to shut down a
port.
Priority for untagged traffic Indicates the default priority for untagged frames (page 4-357).
GVRP Status
Shows if GARP VLAN Registration Protocol is enabled or disabled (page 4-295).
Allowed VLAN Shows the VLANs this interface has joined, where “(u)” indicates untagged and
“(t)” indicates tagged (page 4-304).
Forbidden VLAN Shows the VLANs this interface can not dynamically join via GVRP (page 4-305).
Private-VLAN Mode Shows the private VLAN mode as host, promiscuous, or none (4-318).
Private VLAN
host-association
Shows the secondary (or community) VLAN with which this port is associated
(4-319).
Private VLAN mapping Shows the primary VLAN mapping for a promiscuous port (4-320).
802.1Q-tunnel Status Shows if 802.1Q tunnel is enabled on this interface (page 4-309).
802.1Q-tunnel Mode Shows the tunnel mode as Normal, 802.1Q Tunnel or 802.1Q Tunnel Uplink
(page 4-309).
802.1Q-tunnel TPID Shows the Tag Protocol Identifier used for learning and switching packets
(page 4-310).
Table 4-57 ATC Commands
Command Function Mode Page
Threshold Commands
auto-traffic-control
apply-timer
Sets the time at which to apply the control response after
ingress traffic has exceeded the upper threshold
GC 4-236
auto-traffic-control
release-timer
Sets the time at which to release the control response
after ingress traffic has fallen beneath the lower threshold
GC 4-237
auto-traffic-control * Enables automatic traffic control for broadcast or multicast
storms
IC (Port) 4-238
auto-traffic-control
alarm-fire-threshold
Sets the upper threshold for ingress traffic beyond which
a storm control response is triggered after the apply timer
expires
IC (Port) 4-238
auto-traffic-control
alarm-clear-threshold
Sets the lower threshold for ingress traffic beneath which
a cleared storm control trap is sent
IC (Port) 4-239
auto-traffic-control action Sets the control action to limit ingress traffic or shut down
the offending port
IC (Port) 4-240
auto-traffic-control
control-release
Manually releases a control response IC (Port) 4-241
auto-traffic-control
auto-control-release
Automatically releases a control response PE 4-242
Table 4-56 Interfaces Switchport Statistics (Continued)
Field Description