LevelOne FGL-2870 - Manual (Page 610)

Command Line Interface
4-244
4
snmp-server enable port-traps atc multicast-alarm-clear
This command sends a trap when multicast traffic falls beneath the lower threshold
after a storm control response has been triggered. Use the no form to disable this
trap.
Syntax
[no] snmp-server enable port-traps atc multicast-alarm-clear
Default Setting
Disabled
Command Mode
Interface Configuration (Ethernet)
Example
Related Commands
auto-traffic-control action (4-240)
auto-traffic-control alarm-clear-threshold (4-239)
snmp-server enable port-traps atc broadcast-control-apply
This command sends a trap when broadcast traffic exceeds the upper threshold for
automatic storm control and the apply timer expires. Use the no form to disable this
trap.
Syntax
[no] snmp-server enable port-traps atc broadcast-control-apply
Default Setting
Disabled
Command Mode
Interface Configuration (Ethernet)
Example
Related Commands
auto-traffic-control alarm-fire-threshold (4-238)
auto-traffic-control apply-timer (4-236)
Console(config)#interface ethernet 1/1
Console(config-if)#snmp-server enable port-traps atc multicast-alarm-clear
Console(config-if)#
Console(config)#interface ethernet 1/1
Console(config-if)#snmp-server enable port-traps atc
broadcast-control-apply
Console(config-if)#