LevelOne FGL-2870 - Manual (Page 699)

VLAN Commands
4-333
4
switchport voice vlan priority
This command specifies a CoS priority for VoIP traffic on a port. Use the no form to
restore the default priority on a port.
Syntax
switchport voice vlan priority priority-value
no switchport voice vlan priority
• priority-value - The CoS priority value. (Range: 0-6)
Default Setting
6
Command Mode
Interface Configuration
Command Usage
Specifies a CoS priority to apply to the port VoIP traffic on the Voice VLAN.
The priority of any received VoIP packet is overwritten with the new priority
when the Voice VLAN feature is active for the port.
Example
The following example sets the CoS priority to 5 on port 1.
show voice vlan
This command displays the Voice VLAN settings on the switch and the OUI
Telephony list.
Syntax
show voice vlan {oui | status}
• oui - Displays the OUI Telephony list.
• status - Displays the global and port Voice VLAN settings.
Default Setting
None
Command Mode
Privileged Exec
Console(config)#interface ethernet 1/1
Console(config-if)#switchport voice vlan priority 5
Console(config-if)#