LevelOne FGL-2870 - Manual (Page 128)

Configuring the Switch
3-74
3
Web – Click Security, Authentication Settings. To configure local or remote
authentication preferences, specify the authentication sequence (i.e., one to three
methods), fill in the parameters for RADIUS or TACACS+ authentication if selected,
and click Apply.
Figure 3-41 Authentication Settings
CLI – Specify all the required parameters to enable logon authentication.
Console(config)#authentication login radius 4-113
Console(config)#radius-server auth-port 181 4-116
Console(config)#radius-server key green 4-117
Console(config)#radius-server retransmit 5 4-117
Console(config)#radius-server timeout 10 4-118
Console(config)#radius-server 1 host 192.168.1.25 4-115
Console(config)#end
Console#show radius-server
4-119
Global Settings:
Authentication Port: 181
Accounting Port: 1813
Retransmit Times: 5
Request Timeout: 10
Server 1:
Server IP Address: 192.168.1.25
Authentication Port: 181
Accounting Port: 1813
Retransmit Times: 5
Request Timeout: 10
Radius server group:
Group Name Member Index
--------------------- -------------
radius 1