LevelOne FGL-2870 - Manual (Page 139)

User Authentication
3-85
3
CLI – Use the following command to display the currently applied accounting
methods, and registered users.
Authorization Settings
AAA authorization is a feature that verifies a user has access to specific services.
Command Attributes
• Method Name – Specifies an authorization method for service requests.
The “default” method is used for a requested service if no other methods have been
defined. (Range: 1-255 characters)
• Service Request – Specifies the service as Exec (authorization for local console
or Telnet connections).
• Group Name - Specifies the authorization server group.
(Range: 1-255 characters)
The group name “tacacs+” specifies all configured TACACS+ hosts (see
"Configuring Local/Remote Logon Authentication" on page 3-72). Any other group
name refers to a server group configured on the TACACS+ Group Settings page.
Authorization is only supported for TACACS+ servers.
Console#show accounting 4-131
Accounting Type : dot1x
Method List : default
Group List : radius
Interface :
Method List : tps-method
Group List : tps-radius
Interface :
Accounting Type : Exec
Method List : default
Group List : tacacs+
Interface :
Accounting Type : Commands 0
Method List : default
Group List : tacacs+
Interface :
Console#show accounting statistics
Total entries: 3
Acconting type : dot1x
Username : testpc
Interface : eth 1/1
Time elapsed since connected: 00:24:44
Acconting type : exec
Username : admin
Interface : vty 0
Time elapsed since connected: 00:25:09
Console#