LevelOne FGL-2870 - Manual (Page 173)

General Security Measures
3-119
3
• Dynamic VLAN – Enables dynamic VLAN assignment for an authenticated port.
When enabled, any VLAN identifiers returned by the RADIUS server are applied to
the port, providing the VLANs have already been created on the switch. (GVRP is
not used to create the VLANs.) (Default: Enabled)
The VLAN settings specified by the first authenticated MAC address are
implemented for a port. Other authenticated MAC addresses on the port must have
the same VLAN configuration, or they are treated as authentication failures.
If dynamic VLAN assignment is enabled on a port and the RADIUS server returns
no VLAN configuration, the authentication is still treated as a success, and the host
is assigned to the default untagged VLAN.
When the dynamic VLAN assignment status is changed on a port, all authenticated
addresses are cleared from the secure MAC address table.
• Dynamic QoS – Enables dynamic QoS assignment for an authenticated port.
(Default: Disabled)
Note: MAC authentication cannot be configured on trunk ports. Ports configured as trunk
members are indicated on the Network Access Port Configuration page in the
“Trunk” column.
Web – Click Security, Network Access, Port Configuration.
Figure 3-70 Network Access Port Configuration