LevelOne FGL-2870 - Manual (Page 391)

System Management Commands
4-25
4
Command Mode
Global Configuration
Command Usage
Input strings cannot contain spaces. The banner configure ip-lan command
interprets spaces as data input boundaries. The use of underscores ( _ ) or
other unobtrusive non-letter characters is suggested for situations where white
space is necessary for clarity.
Example
banner configure lp-number
This command is used to configure the LP number information displayed in the
banner. Use the no form to restore the default setting.
Syntax
banner configure lp-number lp-num
no banner configure lp-number
lp-num - The LP number. (Maximum length: 32 characters)
Default Setting
None
Command Mode
Global Configuration
Command Usage
Input strings cannot contain spaces. The banner configure lp-number
command interprets spaces as data input boundaries. The use of underscores
( _ ) or other unobtrusive non-letter characters is suggested for situations
where white space is necessary for clarity.
Example
Console(config)#banner configure ip-lan 192.168.1.1/255.255.255.0
Console(config)#
Console(config)#banner configure lp-number 12
Console(config)#