LevelOne FGL-2870 - Manual (Page 333)

Multicast Filtering
3-279
3
Command Attributes
• VLAN ID – VLAN Identifier. (Range: 1-4094).
• Immediate Leave – Sets the status for immediate leave on the specified VLAN.
(Default: Disabled)
Web – Click IGMP Snooping, IGMP Immediate Leave. Select the VLAN interface to
configure, set the status for immediate leave, and click Apply.
Figure 3-158 IGMP Immediate Leave
CLI – This example enables IGMP immediate leave for VLAN 1 and then displays
the current IGMP snooping status.
Console(config)#interface vlan 1
Console(config-if)#ip igmp snooping immediate-leave
4-377
Console(config-if)#end
Console#show ip igmp snooping
4-377
Service Status: Enabled
Querier Status: Disabled
Leave proxy status: Enabled
Query Count: 2
Query Interval: 125 sec
Query Max Response Time: 10 sec
Router Port Expire Time: 300 sec
Immediate Leave Processing: Enabled on VLAN 1,
IGMP Snooping Version: Version 2
Console#