LevelOne FGL-2870 - Manual (Page 374)

Command Line Interface
4-8
4
To enter the other modes, at the configuration prompt type one of the following
commands. Use the exit or end command to return to the Privileged Exec mode.
For example, you can use the following commands to enter interface configuration
mode, and then return to Privileged Exec mode
Table 4-2 Configuration Modes
Mode Command Prompt Page
Line line {console | vty} Console(config-line) 4-44
Access
Control List
access-list arp
access-list ip standard
access-list ip extended
access-list ipv6 standard
access-list ipv6 extended
access-list mac
Console(config-arp-acl)
Console(config-std-acl)
Console(config-ext-acl)
Console(config-std-ipv6-acl)
Console(config-ext-ipv6-acl)
Console(config-mac-acl)
4-211
4-200
4-200
4-206
4-206
4-214
Class Map class map Console(config-cmap) 4-369
Interface interface {ethernet port | port-channel id| vlan id} Console(config-if) 4-220
MSTP spanning-tree mst-configuration Console(config-mstp) 4-275
Policy Map policy map Console(config-pmap) 4-369
Server Group aaa group server {radius | tacacs+} Console(config-sg-radius)
Console(config-sg-tacacs+) 4-123
VLAN vlan database Console(config-vlan) 4-298
Console(config)#interface ethernet 1/5
.
.
.
Console(config-if)#exit
Console(config)#