LevelOne FGL-2870 - Manual (Page 577)

Access Control List Commands
4-211
4
access-list arp
This command adds an ARP access list and enters ARP ACL configuration mode.
Use the no form to remove the specified ACL.
Syntax
[no] access-list arp acl-name
acl-name – Name of the ACL. (Maximum length: 16 characters)
Default Setting
None
Command Mode
Global Configuration
Command Usage
• When you create a new ACL or enter configuration mode for an existing ACL,
use the permit or deny command to add new rules to the bottom of the list.
To create an ACL, you must add at least one rule to the list.
• To remove a rule, use the no permit or no deny command followed by the
exact text of a previously configured rule.
• An ACL can contain up to 64 rules.
Example
Related Commands
permit, deny (4-212)
show arp access-list (4-213)
Console(config)#access-list arp factory
Console(config-arp-acl)#