LevelOne FGL-2870 - Manual (Page 598)

Command Line Interface
4-232
4
Command Mode
Normal Exec, Privileged Exec
Command Usage
If no interface is specified, information on all interfaces is displayed.
Example
This example shows the configuration setting for port 24.
Console#show interfaces switchport ethernet 1/24
Broadcast Threshold: Enabled, 64 Kbits/second
Multicast Threshold: Disabled
Unknown-unicast Threshold: Disabled
LACP Status: Disabled
Ingress Rate Limit: Disabled, 1000000 Kbits per second
Egress Rate Limit: Disabled, 1000000 Kbits per second
VLAN Membership Mode: Hybrid
Ingress Rule: Enabled
Acceptable Frame Type: All frames
Native VLAN: 1
Priority for Untagged Traffic: 0
GVRP Status: Disabled
Allowed VLAN: 1(u),4093(t),
Forbidden VLAN:
Private-VLAN Mode: NONE
Private-VLAN host-association: NONE
Private-VLAN Mapping: NONE
802.1Q-tunnel Status: Disable
802.1Q-tunnel Mode: NORMAL
802.1Q-tunnel TPID: 8100(Hex)
Console#
Table 4-56 Interfaces Switchport Statistics
Field Description
Broadcast Threshold Shows if broadcast storm suppression is enabled or disabled; if enabled it also
shows the threshold level (page 4-227).
Multicast Threshold Shows if multicast storm suppression is enabled or disabled; if enabled it also
shows the threshold level (page 4-227).
Unknown-unicast
Threshold
Shows if unknown unicast storm suppression is enabled or disabled; if enabled
it also shows the threshold level (page 4-227).
LACP Status Shows if Link Aggregation Control Protocol has been enabled or disabled
(page 4-250).
Ingress Rate Limit Shows if ingress rate limiting is enabled, and the current rate limit. (page 4-263).
Egress Rate Limit Shows if egress rate limiting is enabled, and the current rate limit. (page 4-263).
VLAN Membership Mode Indicates membership mode as Trunk or Hybrid (page 4-301).
Ingress Rule
Shows if ingress filtering is enabled or disabled (page 4-302).
Note: Ingress filtering is always enabled.
Acceptable Frame Type Shows if acceptable VLAN frames include all types or tagged frames only
(page 4-302).
Native VLAN Indicates the default Port VLAN ID (page 4-303).