LevelOne FGL-2870 - Manual (Page 485)

Authentication Commands
4-119
4
show radius-server
This command displays the current settings for the RADIUS server.
Default Setting
None
Command Mode
Privileged Exec
Example
TACACS+ Client
Terminal Access Controller Access Control System (TACACS+) is a logon
authentication protocol that uses software running on a central server to control
access to TACACS-aware devices on the network. An authentication server
contains a database of multiple user name/password pairs with associated privilege
levels for each user or group that require management access to a switch.
Console#show radius-server
Remote RADIUS Server Configuration:
Global Settings:
Authentication Port : 1812
Accounting Port : 1813
Retransmit Times : 2
Request Timeout : 5 seconds
Attributes:
NAS-IP-Address (4) : 192.168.1.1
Server 1:
Server IP Address : 10.1.2.3
Authentication Port : 1812
Accounting Port : 1813
Retransmit Times : 2
Request Timeout : 5 seconds
Radius server group:
Group Name Member Index
--------------------- -------------
radius 1
Console#
Table 4-32 TACACS Commands
Command Function Mode Page
tacacs-server host Specifies the TACACS+ server GC 4-120
tacacs-server port Specifies the TACACS+ server network port GC 4-120
tacacs-server key Sets the TACACS+ encryption key GC 4-121
tacacs-server retransmit Sets the number of retries GC 4-121
tacacs-server timeout Sets the interval before resending an authentication request GC 4-122
show tacacs-server Shows the current TACACS+ settings GC 4-122