LevelOne FGL-2870 - Manual (Page 407)

System Management Commands
4-41
4
• File information is shown below:
Example
The following example shows how to display all file information:
whichboot
This command displays which files were booted when the system powered up.
Command Mode
Privileged Exec
Example
This example shows the information displayed by the whichboot command. See
the table under the dir command for a description of the file information displayed by
this command.
Table 4-12 File Directory Information
Column Heading Description
File name The name of the file.
File type File types: Boot-Rom, Operation Code, and Config file.
Startup Shows if this file is used when the system is started.
Size The length of the file in bytes.
Console#dir
File name File type Startup Size (byte)
------------------------------------- -------------- ------- -----------
Unit1:
FGL-2870_diag_V1.0.0.8.bix Boot-Rom Image N 1383604
FGL-2870_diag_V1.2.0.1.bix Boot-Rom Image Y 1406420
FGL-2870-OP-V1.3.4.0.bix Operation Code Y 4417488
Factory_Default_Config.cfg Config File N 488
startup1.cfg Config File Y 3993
---------------------------------------------------------------------------
Total free space: 7995392
Console#
Console#whichboot
File name File type Startup Size
(byte)
---------------------------------------- -------------- ------- ---------
Unit1:
FGL-2870_diag_V1.2.0.1.bix Boot-Rom Image Y 1406420
FGL-2870-OP-V1.3.4.0.bix Operation Code Y 4417488
startup1.cfg Config File Y 3993
Console#