LevelOne FGL-2870 - Manual (Page 421)

System Management Commands
4-55
4
Example
terminal history
This command configures parameters for storing previously entered commands.
Use the no form to restore the default setting.
Syntax
terminal history [size number-of-lines]
no terminal history [size]
Default Setting
Enabled
10 lines
Command Mode
Privileged Exec
Command Usage
• Use this command without the size keyword to enable the command history
buffer. Use the size keyword to set the size of the command history buffer.
• The default history buffer size is fixed at 10 Execution commands and
10 Configuration commands.
Example
Related Commands
show history (4-13)
disconnect
This command terminates an SSH, Telnet, or console connection.
Syntax
disconnect session-id
session-id – The session identifier for an SSH, Telnet or console
connection. (Range: 0-4)
Command Mode
Privileged Exec
Command Usage
Specifying session identifier “0” will disconnect the console connection.
Specifying any other identifiers for an active session will disconnect an SSH or
Telnet connection.
Console#terminal terminal-type vt-102
Console#
Console#terminal history size 20
Console#